Second-line decoder (positive and negative flip type)
1. The company's factory product has a pulse width of 30ms and an output of 9V pulse decoder. In actual use, some electric ball valves or DC motors flip the voltage between positive and negative to achieve opening and closing. To turn off the effect, the pulse type must be converted into the inversion type as follows: Use the remote control 9000 to press the # key to invert the output, and it can be used normally;
2. If you want to change the flip-type decoder back to a pulse decoder with a pulse width of 30ms, use the remote control 9030 to press the # key to send to modify the pulse width (the pulse width change range is 2ms -255ms);
3. Enter 0 on the remote control and press the # key to send a command to the second-line decoder, and the switch status will change;
Second-line decoder (switch type)
1. Since the company's factory product is a decoder with a pulse width of 30ms (pulse type decoder), use the remote control 9001 to press the # key to switch the output on and off (it becomes a switch type decoder) ) (9V power output when on, voltage 0 when off) If it is found to be a switching decoder, it needs to be changed into a pulse decoder, for example, the pulse width is 100ms, use the remote control 9100 to press the # key, it will become a pulse decoder. The pulse type second-line decoder is 100ms wide. There is no extension line when connected to the Fujin solenoid valve decoder. Other second-line decoders must add extension lines;
2. Enter 0 on the remote control and press # to send a command to the second-line decoder, and the switch status will change.
Input voltage: 9-24VAC/DC
Output mode: pulse output
Output voltage: 9-24VDC
Static power consumption: <1W
Specifications: 74X45.6X20MM
Material: PA66+30%GF
